Every hi-vis garment sold for work in the UK carries a class under EN ISO 20471, and the class is not a quality grade. It is a measure of how much of the garment is fluorescent fabric and reflective tape, and therefore how far away and how reliably a driver can see the person wearing it. Picking the wrong class is the commonest mistake in a workwear order, so here is what the numbers mean and where each one applies.
The three classes
Class 1 is the minimum: at least 0.14 square metres of fluorescent material and 0.10 of reflective tape. It covers small garments such as hi-vis trousers, some vests worn with other hi-vis, and a few polos. On its own it is for low-risk settings, car parks, warehouses and slow traffic.
Class 2 is the everyday standard: 0.50 square metres of fluorescent material and 0.13 of tape. The classic two-band-and-brace vest is Class 2, and so are most hi-vis polos, t-shirts and short jackets. It is what a construction site, a delivery yard or a roadside job at normal speeds asks for.
Class 3 is the highest: 0.80 square metres of fluorescent material and 0.20 of tape, which in practice means sleeves. Bomber jackets, parkas, long-sleeved polos and fleeces with reflective tape on the arms reach Class 3. It is required on high-speed roads, motorways, airports and anywhere people work in poor light. Two Class 2 garments worn together do not make Class 3 unless they are certified as a set.
Rail is a separate standard
Work on or near the railway needs garments that meet RIS 3279-TOM as well, which specifies orange fabric and its own tape layout. A yellow Class 3 jacket is not rail-compliant however good it is. On our product pages the rail rating is listed where the manufacturer certifies it, usually on the orange colourway only.
Branding hi-vis without losing the class
A logo on hi-vis is normal and legal, but it counts against the fluorescent area if it covers too much. Keep a chest logo small, keep any print off the reflective tape, and on a vest put the company name on the back between the bands rather than across them. Print is the better finish on hi-vis because it sits flat; embroidery is fine on the plain chest panel of a polo, fleece or jacket. Our product pages show the logo at its real size on the garment before you order.
Which class should I buy?
- Warehouse, car park, events, low-speed yards: Class 2 vests or polos.
- Construction sites and roads up to normal speeds: Class 2 as a minimum, Class 3 for anyone near moving plant.
- Motorways, dual carriageways, airports, night work: Class 3 jackets and trousers.
- Railway: RIS 3279-TOM orange garments.
All of our hi-vis workwear lists its class on the product page, and every garment can be printed or embroidered with your logo in-house. If you are not sure what your site requires, the site manager's risk assessment will say, and we are happy to check a garment against it before you order.
More news
Bite alarms, indicators and pods: setting up bite indication
How a bite alarm and an indicator work together, when you need a receiver, and whether bank sticks or a pod suit your bank, with the NGT alarms and pods to do it with.
PVA mesh, bags, string and tape: which one, and when
PVA dissolves in water and puts a patch of bait round your hook. The four forms it comes in, what each is for, and how to store it so it does not melt in the bag.
Carp care: the kit every fishery expects you to carry
Unhooking mats, cradles, slings, nets and antiseptic: what each one is for, which one a day-ticket lake will ask to see, and the NGT kit that covers it.
Bivvy or brolly? Shelter for your first night on the bank
When a brolly is enough, when a bivvy earns its place, and what to sleep on and in, with the NGT shelters, bedchairs and sleeping bags to do it with.
Brew kit on the bank: kettle, stove and gas explained
How to put together a bankside brew kit that boils fast and packs small, which gas fits which stove, and the NGT kettles, stoves and bags to do it with.
Your first carp session: the kit that actually matters
What a first carp set-up needs and what can wait, from rods and alarms to the mat the fishery will ask to see, with the NGT kit we would put together for it.